New shearing mechanical coating technology for synthesis of alumina-supported cobalt Fischer–Tropsch solid catalysts
Mengnan Lu, Nouria Fatah and Andrei Y. Khodakov
Mater. Chem. A, (2017), 5, 9148-9155, DOI : 10.1039/C7TA01174A
New micro-fluidized bed reactor with a novel diagnostic method based on pressure fluctuation measurement
Haiqin Quan, Nouria Fatah
16ème congres français du génie des procédés, Nancy, 2017
Application of the experimental design to optimize the mechanosynthesis process for the Co/alumina catalyst
M. Lu, N. Fatah
22nd International Conference on Advanced Materials and Nanotechnology, Tokyo, 2018
Use of experimental designs to optimize fluidized bed granulation of maltodextrin
Layella Ziyani, Nouria Fatah
Advanced Powder Technology (2014), 25, 1069–1075.
Solvent-free synthesis of alumina supported cobalt catalysts for Fischer-Tropsch synthesis
Lu M., Fatah N., Khodakov A.Y.
Journal of Energy Chemistry 25(6) (2016) pp. 1001-100
Flow Hydrodynamic Study in a Micro-fluidized Bed of Geldart Group A, B and C
Nouria FATAH, Haiqin QUAN, Fabien DHAINAUT, Fabien VERBRUGGHE
Powders, Fluidization XV, Conference; 2016.
Study and comparison of micronic and nanometric powders: Analysis of physical, flow and interparticle properties of powders
Nouria Fatah
Powder Technology, 190, pp.41-47, 2009
Optimization of solvent-free mechanochemical synthesis of Co/Al2O3 catalysts using low- and high-energy processes
Mengnan Lu, Nouria Fatah and Andrei Y. Khodakov
Journal of Materials Science (2017), Vol. 52, 20, 12031–12043
New Micro-Fluidized Bed Reactor for Conversion of Syngas to Ultraclean Hydrocarbon Fuels
Nouria Fatah, Haiquin Quan
XXII International Conference on Chemical Reactors CHEMREACTOR, 2016
Modeling of Fixed Bed Methanation Reactor for Syngas Production: Operating Window and Performance Characteristics
Naren Rajan PARLIKKAD, Stéphane CHAMBREY, Pascal FONGARLAND, Nouria FATAH and Andrei KHODAKOV
FUEL, vol. 111, pg. 845-854 (2013)
The impact of consolidation and interparticle forces on cohesive cement powder
Djamel Turki, Nouria Fatah and Messaoud Saidani
International Journal of Materials Research: (2015). Vol. 106, No. 12, pp. 1258-1263.
Kinetic investigation of carbon monoxide hydrogenation under realistic conditions of methanation of biomass derived syngas
Zhang Jie, Fatah Nouria, Capela Sandra, Kara Yilmaz, Guerrini Olivier, Khodakov Andrei Y
Fuel, vol. 111, pg. 845-854 (2013).
Kinetic investigation of carbon monoxide hydrogenation under realistic conditions of methanation of biomass derived syngas
J. Zhang, S. Chambrey, N. P. Narren, N. Fatah, P. Fongarland, S. Capela, Y. Kara, O. Guerrini, A. Y. Khodakov
10th Natural Gas Conversion Symposium, Doha (Qatar), 2014.
Novel solvent-free preparation of cobalt catalysts for Fischer-Tropsch synthesis
Mengnan Lu, Nouria Fatah and Andrei Khodakov
24th North American Catalysis Society Meeting, Pittsburgh, 2015.
Diversiform Mechano -‐ Synthesis Processes For Design Of Solid Cobalt Fischer-Tropsch Catalysts Without Solvent
M. Lu, N. Fatah; A.Y. Khodakov
Mech’cheM, 2015 International Symposium on Mechanochemistry.
New Mechano-Synthesis Technology To Prepare Co3O4/ Al2O3 Fischer-Tropsch Catalyst Powders
Mengnan Lu, Nouria Fatah, Andrei Khodakov
10th European Congress Of Chemical Engineering, 2015, Nice, France
Description of consolidation forces on nanometric powders
D. TURKI AND N. FATAH
Brazilian,. J. Chem. Eng., vol.27, No.4, p.555-562, 2010.
Design of novel Co/Al2O3 Fischer-Tropsch catalysts by dry mechano-synthesis process
M. Lu, N. Fatah, A. Khodakov
STPMF 2015, Science et Technolgie des Poudres, 2015
Etude hydrodynamique des microréacteurs à lits fluidisés : Système MicroGazique
Nouria Fatah
Colloque de Science et Technologie des Poudres et Materiaux Frittes, 2015.
Novel process for eggshell-type Co/Al2O3 catalysts: Application in Fischer-Tropsch synthesis
X. Liu, M. Lu, N. Fatah, A Khodakov
FCCat1, (2016)
Novel process of eggshell-type Co/Al2O3 catalysts synthesis applying to Fischer-Tropsch liquid fuels from biomass
Xuemei Liu et Nouria Fatah
International Symposium on Catalytic Conversions of Biomass », 2016
Dry coating process for alumina supported cobalt catalysts: Application for Fischer-Tropsch synthesis
X. Liu, N. Fatah
International Conference on Functional Nanomaterials and Nanodevices, Budapest, Hungary, 24-27 September 2017
Mechanical coating process for alumina-supported cobalt catalysts: effects of support properties and operation conditions
X. Liu, N. Fatah
The International Conference on Surfaces, Coatings and Interfaces, 2018
Optimization of the operating conditions of dry coating process on solids supports
X. Liu, N. Fatah
European Conference on Applications of Surface and Interface Analysis (ECASIA), 2017.
Application of the experimental design to optimize the mechanosynthesis process for the Co/alumina catalyst
N. Fatah, M. Lu, L. Galet, and A. Chamayou
the 7th World Congress on Particle Technology (WCPT7), May 19 to May 22, 2014, in Beijing, China.
Influence of moisture content on the flow properties of wet and semi-dry flue-gas desulfurization gypsum: application to the design of an industrial silo
M. LE CALVEZ, N. FATAH, M. MARGOT AND S. DEVROE
ISBN 978-3-00-030570-2, 2010.
Nouvelle méthode d’analyse et de compréhension du comportement des poudres cohésives et non cohésives
N. Fatah et C. Pierlot
Technologie des Poudres et Matériaux Frittés 96, 8p, 2009.
Behavior and Fluidization of the Cohesive Powders Agglomerates Sizes Approach
D. TURKI and N. FATAH
Brazilian Journal of Chemical Engineering, Vol. 25, N°04, pp.697-711, 2008.
Etude et comparaison des poudres microniques et nanométriques : Approche microscopique pour le calcul des propriétés interparticulaires
N. FATAH
Récent Progrès en Génie des Procédés, Science et Technologie des poudres, ed. Lavoisier, N°95, 8p, 2007
Treatment of polyethylene powder using a remote nitrogen plasma reactor coupled with a fluidized bed: Influence on wettability and flowability
.B LEROY, N. FATAH, B. MUTEL and J. GRIMBLOT
Plasmas and Polymers, vol.8, N°1, pp13-29, 2003
Powder technology : interaction between theoretical, paratical teaching and sensory analysis
N. FATAH
Particle Technology (AIChE), 5, 8p., 2006
Fluidization and study of nanometric powders behavior: Numerical approach to estimate the agglomerates sizes
N. FATAH and D. TURKI
Particle Technology, (AIChE), 5, 16p., 2006
Simulation d’un four à lit fluidisé pour la captation des gaz de SO2 et HCl provenant de l’incinération des ordures ménagères
N. FATAH et P. C PICQUET
Récent Progrès en Génie des Procédés, Ed. Lavoisier, N°92, pp8, 2005.
Surface Modification of polyethylene powders using a remote nitrogen plasma and a fluidised bed reactor
B.MUTEL, N. FATAH, H. VEZIN AND J. GRIMBLOT
16 The International Symposium on Plasma Chemistry, Taormina, 6 pages, 2003.
Elaboration d’un procédé de mise en forme d’une poudre de peptides hémiques à propriétés contrôlées
F. NEDJAOUM, N. FATAH, B. FERTIN, P. DHUSLSTER, V. LEBRET, J.P. TISSIER ET D. GUILLOCHON
Récents Progrès en Génie des Procédés, Lavoisier Technique et Documentation, N°90, pp 2-28, 2003.
Defluidization at high temperature in fluidized bed of sand by addition of calcium carbonate
V. DELVINQUIER, N. FATAH, S. PIETRZYK, P. BERTE, B. BRUYET et J.Y DAUPHIN
Fluidized Bed Combustion, Ed. K.J. Heinschel, ASME, vol.2, pp801-806, 1995.
Oxydehydrogenation of propane on NiMo4 catalyst under transient and steady state conditions
S. PIETRZYK, M. OULD MOHAMED MAHMOUD, T. REMBECZKY, R. BECHARA, M. CZERNICKI, N. FATAH
Stud. Surf. Sci. Catal., 109, pp263-271, 1997.
Measurement of fluidization properties of fine particles and correlation with rheological parameters
N. FATAH and V. CAVROIS
Engineering Fundation, Ed. L.S. Fan et T. Knowlton, vol.9, pp277-284, 1998.
Mesures de paramètres rhéologiques des poudres cohésives
N. FATAH, S. PIETRZYK and V. CAVROIS
2ème Colloque Science et Technologie des Poudres, 3-5 mars Lyon, pp 283-290, 1998.
Damages in agitated vessel of large viscoelastic particles dispersed in a highly viscous fluid
L. BOUVIER, G. DELAPLACE, N. FATAH, A. LINE
Journal of Food Science , Vol. 76, Nr. 5,pp.384-391, 2011
Fluidization of large particles at high temperature: hydrodynamics and heat transfer
G. FLAMANT and N. FATAH
Trends in heat and Mass & Momentum Transfer 1, pp167-185, 1991.
Vitesse et porosité à haute température au minimum de fluidisation
G. FLAMANT, N. FATAH, D. HERNANDEZ, B. MURACHMAN et C. LAGUERIE
Analyse critique des résultats expérimentaux. Entropie N°146-147, pp93-103, 1989.
Temperature distribution near a heat exchanger’s wall immersed in high temperature packed and fluidized beds
G. FLAMANT, G. OLALDE, D. HERNANDEZ and N. FATAH
ASME, Radiation Heat Transfer, 8 pages, 1990.
Détermination des régimes de fluidisation des grosses particules à haute température par mesures des fluctuations de pertes de charges
N. FATAH, G. FLAMANT, D. HERNANDEZ et M. LEBRUN
Entropie n°159 pp25-34, 1990.
High-temperature velocity and porosity at minimum of fluidization. Critical analysis of experimental results
G. FLAMANT, N. FATAH, D. HERNANDEZ, B. MURACHMAN, et C. LAGUERIE
International Chemical Engineering, vol.31, N° 4, pp673-684, 1991.
Wall to bed heat transfer in gas-solid fluidized beds: prediction of heat transfer regimes
G. FLAMANT, Y. FLITRIS and N. FATAH
Powder Technology, 69, pp223-230, 1992.
Temperature distribution near a heat exchanger’s wall immersed in high temperature packed and fluidized beds
G. FLAMANT, N. FATAH, G. OLALDE and D. HERNANDEZ
Journal of Heat Transfer, Transaction of the ASME, vol.114, pp50-55, 1992.
Velocity at the onset of slugging in large particules fluidized systems at high temperature
N. FATAH, G. FLAMANT
Fluidizacion y Sistemas Fluido-Particula, Ed. J. Casal and J. Arnaldos, Girona (Espagne), 16-18 Mayo, pp103-110, 1990.
Diagnostico de los intercambios thermicos entre un lecho fluidizado alta temperatura y una pared en contacto directo
N. FATAH, G. FLAMANT, D. HERNANDEZ and G. OLALDE
Fluidizacion y Sistemas Fluido-Particula, ed. J. Casal and J. Arnaldos , Girona (Espagne) 16-18 Mayo, pp147-154, 1990.
Mesure de la distribution de la température du gaz et des particules au voisinage d’une paroi en lit fluidisé
N. FATAH, G. FLAMANT, D. HERNANDEZ, et G. OLALDE
La Fluidisation, Congrès Français de Génie des Procédés, vol. 5, N°11, pp114-121, 1991.
Gas and solid temperature distribution near an immersed wall in fluidized bed. An experimental and theorical approach
N. FATAH, G. FLAMANT, D. HERNANDEZ, G. OLALDE and D. GAUTHIER
Fluidization VII, Engineering Fundation, Ed. DE Potter, DJ Nicklin, New York, pp 803-812, 1992.
Diagnostic par sondes optiques dans les lits fluidisés de combustion de charbon
N. FATAH, G. FLAMANT, A. KONIUTA et T. QUEVAT
Récent Progrès en Génie des Procédés, Lavoisier, vol.7, N°29, pp257-262, 1993.
Fluidisation et caractérisation rhéologique des fines particules
N. FATAH, S. PIETRZYK and V. CAVROIS
The II Européen Conference on Fluidization, Ed. Martin Olazar and Maria J. San José, Bilbao, pp 75-82, 1997.